Styropek Products in Mexico

Regular Grades (without flame retardant)

P(40)

EPS beads without flame retardant and different levels of pentane as expanding agent.

Available in different bead sizes to cover a wide range of applications, from low density block molding (0.63pcf) to high density block and shape molding with thin walls and smooth surfaces (up to 2.5pcf).

For more details about our products and applications, please refer to the Technical Leaflets.

p40

List of Products P(40)

PRODUCTS APPLICATIONS
Styropek® P 240H Block molding for medium and high densities, excellent fusion or with regrind and short cycle times.
Styropek® P 240AH Block molding for medium and high densities, excellent fusion or with regrind and short cycle times.
Styropek® P 340H
Block and shape molding for high and low densities, excellent fusion or with regrind and short cycle times.
Styropek® P 440H
Shape molding for thin walled applications with fast cycle times. Excellent surface appearance.
Styropek® P 440MH
Shape molding for thin walled applications with fast cycle times. Improved surface appearance than regular P440 product.

Modified Beads (with flame retardant)

 BF(95) / BFL(95)

Modified EPS bead with flame retardant and different levels of pentane as an expanding agent.

Available in different bead sizes to cover a wide range of applications, from low density block molding (0.63pcf) to high density shape molding with thin walls and smooth surfaces (up to 4.0 pcf).

For more details about our products and applications, please refer to the Technical Leaflets.

styropek bf95

List of Products BF(95)

PRODUCTS APPLICATIONS
Styropek® BF 295 Block molding for low densities, with walls with thicknesses> 12 cm., With excellent fusion and high recycling integration
Styropek® BF 395 Block molding for medium and low densities, walls> 8 cm thick, with excellent melting and recycling integration.
Styropek® BF 395S Molding of pieces with walls> 8 cm thick, with excellent fusion and surface finish. Excellent cycle time in packaging molding on machines with vacuum systems.
Styropek® BF 495 Packaging molding for flame retardant material requirements, wall thickness> 6 mm, excellent cycle time and appearance. High density blocks with excellent surface appearance when cut.

Products BFL(95)

PRODUCTS APPLICATIONS
STYROPEK® BFL- 295 Block molding applications, low and high densities requiring excellent fusion or with regrind.
STYROPEK® BFL- 395 Block molding applications, especially suited for fabrication requiring excellent surface appearance.
STYROPEK® BFL- 397 Shape molding applications requiring modified material or high density block molding applications with excellent surface appearance.
STYROPEK® BFL- 397S Shape molding applications requiring modified material or high density block molding applications with excellent surface appearance. Shorter aging and cycle times than regular BFL-397 product.
STYROPEK® BFL- 495 Shape molding for thin walled applications with fast cycles requiring modified material.

BIOPEK MXP

Biopek MXP sample was tested using ASTM D5511 and demonstrated enhanced biodegradation of 24.1% in 361 days as compared 0.3% biodegradation of standard EPS sample, when tested under the same conditions for the same period of time.

BIOPEK MXP LP

Biopek MXP LP sample was tested using ASTM D5511 and demonstrated enhanced biodegradation of 24.1% in 361 days as compared 0.3% biodegradation of standard EPS sample, when tested under the same conditions for the same period of time.

nuevos productos

Thermal Insulation Materials Laboratory

Historical background

The Thermal Insulation Materials laboratory was accredited for the first time under the NMX-EC-IMNC (ISO / IEC17025) standard since 2003 at Polioles Lerma, in the State of Mexico, and in early 2019 it moved to the Styropek Altamira facilities, in Tamaulipas; thus continuing with the commitment to offer quality services and customer service.

This laboratory was the first nationwide to achieve accreditation under the NOM-018-ENER-2011 standard, and currently also provides analysis services under the NMX-C-463-ONNCCE-2010 and NMX-C-137-ONNCCE- 2010.

SCOPE OF ACCREDITATION

The laboratory places the testing services at your service under the following normative references:

NOM-018-ENER-2011
Property Testing method
Apparent density NMX-C-125-ONNCCE-2010 NMX-C-126-ONNCCE-2010
Thermal conductivity NMX-C-181-ONNCCE-2010
Water vapor transmission rate NMX-C-210-ONNCCE-2013
Moisture adsorption and water absorption NMX-C-228-ONNCCE-2013
NMX-C-137-ONNCCE-2010
Property Testing method
Flexural strength Numeral 8.2
Compressive strength Numeral 8.3
Self-extinguishing Numeral 8.6
NMX-C-463-ONNCCE-2020 
Property Testing method
Dimensions Numeral 7.1
Volumetric weight (bulk density) Numeral 7.2
Shear and bending resistance Numeral 7.3
Self-extinguishing Numeral 7.4

aplicaciones

Accreditation as a testing laboratory

The federal government, through the Secretary of Energy, grants powers to Entidad Mexicana de Acreditación, A.C. To guarantee the technical competence of our laboratory in the tests established in NOM-018-ENER-2011, in this way the results reports are recognized by the certifying bodies of thermal insulation materials.

Service processes

Diagram of the testing service process offered by accredited laboratories

Proceso

Contacts of the Laboratory of Thermal Insulation Materials:

Ing. Ángel Núñez

(Representative and Authorized Signatory)

Tel.: (833) 500 2400; Ext. 3963

angel.nunez@styropek.com

Ing. Edwin Jasso

(Signatory of the Laboratory of Thermal Insulation Materials)

Tel.: (833) 500 2400; Ext. 3963

edwin.jasso@styropek.com